Polecam is a unique, no-fuss single operator broadcast quality camera jib Location: United Kingdom
3499.00 GBP NV
Polecam Starter Pack Plus(Long Head) kit
Click on the picture to enlarge!
Please log in to BB List to contact the seller or to make an offer.
This is a used Polecam Starter Pack Plus(Long Head) kit. Please note the tripod in the pictures is not included in the sale. It is just to show how the jib looks when rigged. In great working order and nearly good as new condition. The only fault is the BNC input at the head end doesnít work. Thatís not been a problem for me as the cameras I use have HDMI output and I have a HDMI cable included with the kit. It should be a simple job to replace the BNC connector if you required this. Itís got 2 extra sections so 5.5 meters in length and comes with the wire strut system and in a customised Peli case. I bought it for a job that needed some dramatic shots of buildings and it achieved some great results. Iíve found it works great with a Panasonic GH5. Very portable and quick and easy to set up. Gives a great cinematic feel to any production its used on.
The Long Head by Polecam is specially designed for larger Cameras. The Long Head benefits from full electronic control with pulse encoded Faulhaber motors used for both pan and tilt operations.
The head uses a 12 bit PID motion controller to regulate the pan and tilt axis via a closed loop configuration meaning you get an extremely accurate and easily controllable head. This head can move up to 30 times slower than previous versions and can also do a full 360o in just 7 seconds.
The Long Head is backwards compatible with most Polecam rigs (using up to five sections).
To facilitate unlimited panning the Long Head has power and monitoring options built in via slip rings on the head, designed to monitor a composite signal the BNC actually handles HD SDI which is a useful bonus! (for monitoring purposes only) Power is provided to enable camera DC adapters to be used and there is an iris drive power outlet for our small iris drive motors (used with split head Toshiba cameras and similar mini cams).
The Long Head is designed with flexibility in mind and you can detach the Polecam mounting bracket drop arm (4 screws) and that will reveal a 3/8 UNC threaded plate screwed to the drop arm, remove this and screw it to the top of the Wide Head. Attach the inverted head to whatever suits your intended use.
Max payload: 3.6kg / 8lb
Base plate: 100mm / 3.94" depth slotted centre with two additional slots either side at 20mm/ 0.78" intervals, slot width is 6.5mm / 0.255Ē
Please note the tripod in the pictures is not included in the sale. It is just to show how the jib looks when rigged. I would be happy to show the buyer how to set the jib up.
Completed Sales: 0 - Rated:Not enough data yet sorry