2 x XLR inputs - faders control the post preamp gain.
The PHONE jack is a stereo 3.5mm.
2x LED VU displays.
Low Cut Filters marked 140 20 100 insert a 12db hi pass filter in each channel.
L PAN R allow assignment of the individual channels to the left and right mixing busses.
400HZ reference tone.
Slate Mic button enables the slate function to be sent to the left and right line outputs.
Tape-Mix allows the monitor output (headphones) to receive audio from an internal or external source.
The XLR mic inputs are electronically balanced.
Three modes of mic powering. 48V/ 12V T power/ Dynamic
Preamp Gain of 10 20 0
The brightness of the VU display can be varied.
The output can be switched from line level to mic level using the MIC-LINE switch.
Mic Out provides single ended stereo outputs which are 50db below line level.
External Power (not included) allows the unit to operate from an external power source between 9V – 18VDC.
Tape Rtn provided by the 3.5mm stereo jack input.