The D5T Tripod Tracking Dolly is ideal for use on location or in the studio, all you need is a reasonably flat surface. The dollies width has been set to allow it to go through the majority of doorways and it has its own levelling system which prevents any rocking should the track be on slightly uneven ground. It runs on 40mm diameter track and is supplied with eight 1.5m lengths which provides a 6m run. The dolly will accept all tripods that have feet smaller than 45mm in diameter or with a base spreader and 3 straps are supplied for securing your tripod to the dolly.
The dolly has two sets of locating holes for the tripod legs which means the tripod can be used in both high and low positions. It has eight radial ball bearing wheels which set the track width to the correct positions as the dolly moves down the track. As a result the track does not require additional supports going between the two sides of track which makes it quicker to set-up and also allows the dolly to pull the track into place which makes it run smoother.
Has had little use and is in very good condition.
`personal collection would be preferred but can send by courier.